Wednesday, August 10, 2016

What the hell is it? Part:3

I'm beginning to think I should start labeling these entries like 80's horror movies. You know; What the hell is it? Part III - 3D or Dream Warriors or something like that. Anyway, getting into the details...














It evolves! It becomes! It is not I who am crazy! It is I who am MAD!

You can begin to see the details I am inflicting upon this poor wad of putty, an asymmetrical fashion design with lots of layers. (I don't know, can you see that?) I decided to avoid a general, specific idea for this guy and make him as eclectic as I possibly can. To do that it's important to be influenced...



At this stage what's needed for me is visuals. Don't get me wrong, I love a good story, (in fact I can get pretty unreasonable about that,) but I usually play something in the background that has some kind of influence on my personal sculpting to help get me in the mood. It's not the story but more that, if I glance up from my project something interesting is happening on the screen. You know; "Visual." For this I decided to go for some of the more eye-popping things I could think of; Terry Gilliam and Brian Froud seemed like excellent spring boards to leap from and I love me some George Miller for unique ideas. So I pulled out a bunch of my inspirational media for a push.




New tools to pay attention to and I can't believe I didn't include them into the usual suspects. Glass plates, caliper and probe. The glass plates are key for acting as a pallet for the putty, it allows you to roll tubes by putting a sausage of Fimo on the plate and rolling out an even length between the two plates or to squash the putty flat so you can use it for lengths of fabric or just to keep your Fimo handy. Very helpful. The caliper is a great assist in making sure you get symmetry between left and right aspect of the sculpt are close. In this case it was the length and width of the feet. The probe is... (wait for it...) A "probe" from an animal dissection kit. Yeah... Just think about why I would have something like that for a second...

The glass plates are from a drink coaster set I got from a craft store. Apparently the marketing idea was that you could put photo's of you and your family in the coaster and while guests drink beverages they could look at pictures of you while you served the drinks. Does that sound... Sane to you? I re-purposed them and now they assist me in my monster-making endeavors. If you want a tool like this you need to find something that is thick and putty will not stick to. The ones I am using are 10mm thick and have beveled edges, not sure where to get them so keep an eye out. Don't get something that's going to crack if you put pressure on it or cut you up when you touch it. Also, if you are using Fimo, DO NOT USE ABS PLASTICS as Fimo will melt it. The caliper is from a drafting tool kit, (Yes, I have drafting / architecture schooling but only at a high school level) and it's one of those tools that you won't use a lot but you'll be happy if you have it. Again, RE-PURPOSED! The probe is pretty much just a needle or pin wedged into the end of a wooden dowel. You can make your own for real cheap but keep in mind that mine IS from an actual dissection kit... Oh, yeah.

The Technical Stuff!

Because I sculpt big I found that starting at the bottom and feet, in most cases, works best. You can't build a house without laying a solid foundation and I need to make sure whatever I sculpt above the waistline will be supported by what's below. So I start at the bottom.




The knee pad was done separately, I have a collection of aluminum tubing and brass rod for various uses. I highly suggest checking this product out, you can find it in your hobby store usually in the RC plane section. I took the caliper, measured the knee and found a piece of tubing that was roughly the same width and sculpted on that instead of the figure. This helps prevent me from mashing-up or deforming the musculature / detail underneath.

Another reason I do this is because it allows me to focus on a specific part of the figure and if I want a piece of detail to really pop out this is how I do it. Things like belt straps and fabric folds are more organic and conform to the shape of the figure and can be sculpted directly on the figure but armor pieces need to look like chunks of metal strapped to a fleshy appendage. Metal beats flesh so the armor pieces that I am sculpting need to look the part which is why I treat them as their own entities.





Here are some close-ups of the foot detail including the knee pad attached to the left leg. Folds and straps for the various effects were done by smashing Fimo between two glass plates until thin. Then I cut them up with the hobby knife to get the sharp edges in the putty, remove them from the glass pallets and arrange them so the sharp edges are where you would expect to see something like that. In this case, the edges of quarters or tongue in the boots or anywhere I needed to show separations of fabric.

I'll cover things like screws and rivets later, maybe next post. Again, if you have questions let me know.

6 comments:

  1. Using glass coasters as putty prep areas? Brilliant!
    I have a q - how portable would you rate mini sculpting? I am wanting to travel abroad for a holiday next year and am trying to devise a compact method of sculpting.
    Do you have any tips or experience?
    Cheers
    Cameron

    ReplyDelete
    Replies
    1. It would depend on where I was going, Lord Tusk from Massive Darkness was done away from home so I had to pack everything I needed for the trip. The trick for me was having access to an oven to bake the putty, without it the sculpt would get damaged in transit.
      Luckily I didn't have to take a plane when I traveled so I didn't have to deal with airport security but if you are then I'd make sure it's not in your carry-on luggage. Other then that everything is fine. The biggest object in my tool chest was the sculpting plinth so a box big enough for that was the only issue I had. I also made sure to bring some bubble wrap and tissue to wrap the sculpt in when I was done for transporting it back. Does that help?

      Delete
    2. Gee It's a lot of little items to consider. Had A brainfart about baking: you think a sunny day and a glass jar might work? I'll Google it.
      Thanks for the prompt reply!

      Delete
    3. I've never tried the sun/jar trick but I've seen what happens to Fimo when it's been left in direct sunlight and it just crumbles. So my initial advice would be to try it out first on a test piece to see what happens before you head out on your trip. I'd roll out a long, cone shape to see what it does to the varying thickness of the putty. But even if it does work you'd be relying on the sun being out to do this.
      As much as greenstuff and I do not get along you might want to look into some kind of two part epoxy to sculpt with on the trip if you do not have access to electricity. Something like Kneadatite or Procreate will skip over the baking issue. But if you do have access to electricity but just not an oven then a heat gun will work on Fimo too. They are as cheap as $20 USD, are portable and can get up to 300 degrees. The nozzle of the gun get very hot so don't lay it on top or lean it against something that melts or catches fire.
      Thanks again for following!

      Delete
  2. Great article as always. So do you bake the kneepads seperately?
    If so, do you attach them using glue?
    Thank you!

    ReplyDelete
    Replies
    1. Yes, the armor is baked separate. I didn't do it on this piece but you can make the shape, bake it then add detail on top of that and bake it again. That way the detail is crisp and really pops off the figure.
      And yes, I will glue it in place. What I have is something called "Liquid Sculpey" that's a bake-able glue. When I'm ready to put the figure in the oven I'll add some to the back of the pad and put it over the knee. It's got the consistency of regular white or wood glue, maybe a bit more sticky but after it comes out of the oven it's solid.
      Glad you are enjoying these posts!

      Delete